Xiaomi Buds 4 Pro

11mm dual-magnet super balance driver for a powerful HiFi audio experience

Experience high quality low-frequency sounds and ultra-linear low distortion with Xiaomi's customised second generation ultra-dynamic dual-magnet ring. The optimised design of the centring disk allows the earbuds to deliver a live-like acoustic experience.

*The images on this page are for illustration purposes only and may not be the exact representation of the product. Product parameters are for reference only. Some product parameters may vary due to external factors such as environment and differences in smartphone systems. Please refer to the actual product for details.
*To experience Hi-Res Audio and Sony's LDAC at 990kbps, please make sure LDAC has been activated on compatible Android™ OS smartphones with correct bitrate selection with Dimensional audio features off. LDAC is a trademark of Sony Corporation. The use of Sony's LDAC and Dimensional audio / built-in Dimensional audio are mutually exclusive.
*Dimensional audio features on Xiaomi Buds 4 Pro are switched off as default, settings available only on selected Xiaomi / Redmi smartphones, including Xiaomi 13 Pro, Xiaomi 13, Xiaomi 13 Lite, Xiaomi 12X, Mi 11i, Mi 11, Mi 11 Ultra.
*Built-in Dimensional audio features are switched off as default. Please download Xiaomi Earbuds app to switch on. Xiaomi 13 Pro, Xiaomi 13, Xiaomi 13 Lite and later launched Xiaomi/Redmi/POCO smartphone / tablet models with Android T don’t support built-in Dimensional audio features.
*Active noise cancellation test data provided by the National Institute of Metrology, China. Xiaomi Buds 4 Pro reaches 48dB ANC depth only at a certain frequency range. Actual results may vary depending on usage conditions. Pinching the stem of either earbud only enables switching between ANC and Transparency modes by default. ANC and transparency mode settings available on Xiaomi Earbuds app.
*Call quality (against ≤32.4 km/h winds) test was conducted by Shenzhen Institute for Technology Innovation(SITI), National Institute of Metrology, China. The test report No. is 202200120002.
*IP54 dust and water-resistant test. According to the GB/T 4208-2017. Enclosure Protection Rating (IP Code), it passed the test conducted by GRG METROLOGY & TEST. The test report No. is H202207132545-01-G1. The test result showed that it is in compliance with the GB/T 4208-2017 standard. IP54 rating applies to the earbuds and charging case. Please do not use your earbuds around hot water, your earbuds cannot be used when bathing or showering. Please try to avoid using your earbuds during strenuous exercise, sweat during exercise may cause damage to the device. This product is splash-proof, water-resistant and dust-resistant at the time of purchase, however, these properties are not permanent and may diminish over time with everyday wear and tear. Your warranty does not cover damage caused to your device by immersion in liquid.
*Battery life and fast charging test conditions: The earbuds' battery level is 100%, volume of the earbuds is adjusted to 50%, the Bluetooth encoding mode is AAC, and the ANC feature, transparency mode, Dimensional audio features and Dual-device connection are turned off. Test item: Fully discharge the Xiaomi Buds 4 Pro battery while playing audio until either earbud stops playing. Ensure that the charging port is free of liquid and foreign objects before charging. Earbud charging and battery life data was retrieved from internal test carried out by the manufacturer. Actual hours of use may vary depending on usage condition, charging level and environmental factors. Battery life test carried out by the manufacturer, test data based on simulation of real life scenarios. Actual results may vary.
*5 minutes fast charging requires the battery of the charging case to be at 35% or above.
*Xiaomi Earbuds app is available for download on Google Play store.
*Dual-device connectivity is switched off as default, experience may vary depending on the device. Please download Xiaomi Earbuds app to switch on. 3rd party computer applications are required to support synchronous pausing or resuming when answering or ending phone calls. Feature name may differ from actual settings. To enjoy Dual-device connectivity between two Xiaomi/Redmi smartphone devices, please switch on the function via Xiaomi Earbuds App on one smartphone only - this feature will operate via traditional Bluetooth connection.
*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi inc. is under license. Other trademarks and trade names are those of their respective owners.